Universal Ceiling Fan Wall Remote Control Kit Replacement for Hampton Bay Hunter Harbor Breeze, 3-Speed Light Dimmer

Universal fan remote control kit is specifically design for Hampton Bay Harbor Breeze fans, Hunter Litex, Home Decorators Collection, Westinghouse, Honeywell and other brands. Etc There are 5 separate buttons for fan: The GREEN button control lights on/off and brightness, 3-speeds (High/Medium/Low)adjustable button and on/off button to control fan.There is a main power switch, you only need to slide the switch to the off button, all the buttons will be invalid, so you can rest assured when you are on a business trip LIGHT/DIMMER button with luminous function, which allow you find this control quickly at night, only controls the brightness of incandescent and halogen lamps, also compatible with some dimmable LED/CFL bulbs,but if your origianl LED/CFL bulbs are Not Dimmable, and the remote only control the On/Off in this case. Open the battery cover and look inside the old remote. There is a series of DIP switches (4). Slide the switches on the new remote with a pen to match the pattern of the old remote. As long as the fan has a receiver (it must also have the same dip switches). Replace the batteries in the new remote and everything will work. If you have more than one ceiling fan in your home, make sure the PIN settings are different between them The SET button is recessed into the hole, use a hard slender object ,such as a needle to insert into the SET hole. It is for setting suitable dimmer level. 1. When the light flickers after dimming, you can use this button to improve this as following :Turn on the fan light and dim light to a suitable level ,then short -pressthe SET button ,the light will turn off and back on, it means the new dimmer level is activated and memorized . 2.Press and hold the SET button for 3seconds to clear the memorized dimmer level .